During recording/playback
Viewfinder status display | Description | Behavior and cause |
---|---|---|
[AUTH NG CARD] |
The CPS authentication of the memory card has failed. The memory card that has failed CPS authentication cannot be recorded or played back. |
|
[BACKUP BATT EMPTY] |
Displays any reduced voltage detected on the backup battery in the internal clock when the power is turned on. |
|
[CARD ERROR] |
Displayed when an data error caused by the P2 card occurs during recording. Displayed after recording stops until the next operation. Also displayed for three seconds during playback when a P2 card error causes playback to stop.
|
|
[DIR NG CARD] |
The directory position is not correct. |
|
[FAN STOPPED] |
Displayed when the fan motor is stopped. |
|
[HIGH TEMPERATURE] |
The temperature inside the camera is higher than that of the normal conditions. |
|
[REC IMPOSSIBLE] |
A card that cannot record is inserted in the main slot or sub slot. |
|
[REC WARNING] |
Displayed when attempting to record in excess of the maximum total number of clips allowed for one P2 card.
|
|
[REC WARNING] |
Displayed when an error occurs in recorded data during recording.
|
|
[REC WARNING] |
Displayed when the recording is cancelled due to error in the reference signal in case such as error has occurred in the video or audio due to disruption of the reference signal during the interval recording.
|
|
[RUN DOWN CARD] |
The maximum number of overwrites has been exceeded. |
|
[TEMPORARY PAUSE] |
Recording is temporary suspended due to correct recording not possible because of the disruption of input signal from the <GENLOCK IN> terminal. The clip will be divided.
|
|
[CINE STYLE DISABLED!] |
CAM INDEX/REEL number cannot be recorded as a file name. |
|
[SUB SLOT REC DISABLED!] |
Recording is not possible because there is no media in the sub slot. |
|
[CHECK BROKEN CLIP] |
The P2 card contains a damaged clip. |
|