Lamp display

  1. Green tally lamp

    Lights up in green when green tally signals are received.

  2. Red tally/recording lamp

    Lights up in red during recording or when red tally signals are received.

    This will illuminate in red during recording with an external device when [SDI REC REMOTE] is set to [ON], or [SDI RAW] is set to anything other than [OFF].

  3. Warning lamp

    Flashes or lights up when a warning occurs with the camera.

  4. Battery lamp

    Starts flashing when the remaining battery level is low. Illuminates when it reaches the battery end.