- Top
- Maintenance
- Customizing of the camera startup screen and setting of the owner information
- Customizing of the startup screen and setting of the owner information
Customizing of the startup screen and setting of the owner information
To customize the startup screen or to set the owner information, an SD memory card is required.
Use the camera or P2 Viewer Plus to format the SD memory card.
Download the required application from the website.
Create the version update firmware using the downloaded application.
Save the created firmware to an SD memory card.
Update the version of the firmware.
Update the version of the firmware following the Steps 3 to 8 in “Updating the firmware”.