Status display

Refer to “Status display (STATUS)”.

Adjusting the screen

Press the <EVF MENU> button.

Screen adjustment items are displayed on the upper part of the screen.

Turn the jog dial button to select the items you want to adjust.

Press the jog dial button.

Turn the jog dial button to make adjustments.

Press the jog dial button.

Press the <EVF MENU> button.

The screen adjustment items display disappears.

This can also be done in [EVF MENU] → [DISPLAY SETUP].

Direct camera settings

The following camera settings can be set directly through viewfinder operation.

[FPS]/[SHUTTER]/[EI]/[WB]

Press the <CAM MENU> button of the viewfinder.

Setting items are displayed on the lower part of the screen.

Turn the jog dial button to select the items you want to set.

Press the jog dial button.

Turn the jog dial button to select setting details.

Press the <CAM MENU> button.

[MENU] settings from the viewfinder

[MENU] of the camera can be directly set with the viewfinder operation.

Press and hold the <CAM MENU> button of the viewfinder for at least two seconds.

The camera [MENU] is displayed.

[MENU] is also displayed on the control panel of the camera.

[EVF MENU] operation

Press and hold the <EVF MENU> button for at least two seconds.

[EVF MENU] is displayed.

[EVF MENU] list

[DISPLAY SETUP]

Item	Description of settings
[COLOR]	Adjusts the color level. [−32] - [31] Factory setting: [0]
[CONTRAST]	Adjusts the contrast. [−32] - [31] Factory setting: [0]
[BRIGHT]	Adjusts the brightness. [−32] - [31] Factory setting: [0]
[PEAKING]	Adjusts the outline of the image in the viewfinder. [0] - [9] Factory setting: [0]
[R BRT]	Adjusts the red color brightness. [−32] - [31] Factory setting: [0]
[G BRT]	Adjusts the green color brightness. [−32] - [31] Factory setting: [0]
[B BRT]	Adjusts the blue color brightness. [−32] - [31] Factory setting: [0]

[SW MODE]

Item	Description of settings
[FRONT TALLY]	Switches enable/disable of the front tally lamp function. [ON]/[OFF] Factory setting: [ON]
[EYE SENSOR]	Sets sensitivity of eye sensor. [NORMAL]: Displays the viewfinder screen according to the eye sensor. [1min]: Keeps the viewfinder screen display for one minute after the eye sensor is released. [5min]: Keeps the viewfinder screen display for five minutes after the eye sensor is released. Factory setting: [NORMAL]
[B/W]	Switches to monochrome mode. [ON]: Display will be all black and white. [OFF]: Disables the monochrome mode. Factory setting: [OFF]
[SCAN]	Reverses the display. [NORMAL]/[REVERSE] Factory setting: [NORMAL]
[PIC. SIZE]	Adjusts the image size displayed in the viewfinder. [0] - [3] Factory setting: [0]

[USER SW 1]/[USER SW 2]

Selects the function assigned to the <EVF USER 1>/<EVF USER 2> button.

This is the common setting as the content displayed and set with [MENU] → [OUTPUT SETTINGS] in the camera.

Description of settings

[CLEAN VIEW]: Switches to display only video or superimposes the display of markers or indicators.

[MARKER]: Displays/hides markers.

[CENTER MARKER]: Displays/hides the center marker.

[SAFETY MARKER]: Switches the display/hide of the safety marker.

[FRAME MARK]: Displays/hides the frame marker.

[USER BOX]: Displays/hides the user box.

[VF COLOR]: Switches the image.

[ZEBRA]: Displays/hides the zebra display.

[FALSE COLOR]: Enables/disables false color mode.

[EXPAND1]: Switches enable/disable of the enlargement function 1.

[IN COLOR F.A.]: Switches enable/disable of the focus in color function.

[SQ. F.A.]: Switches enable/disable of the focus square function.

[MONO F.A.]: Switches enable/disable of monochrome display function.

[SMOOTH MODE]: Enables/disables the smooth mode.

[WFM]: Displays/hides waveform monitor.

Factory setting: [MARKER]

Top of the page

Item	Description of settings
[OPERATION TIME]	Displays the total display time of the organic EL panel of the viewfinder.
[VERSION]	Displays the firmware version of the viewfinder.