[CDL] setting

Selects the CDL function.

The CDL function is enabled when [MAIN COLOR] is set to [V-Log] and [Grading SEL] is set to [Internal] or [External App].

The .cdl file in the SD memory card is displayed and file can be selected.

This can be controlled from each parameter setting screen in the control panel or the external grading application via network.
Upload of the CDL file can also be performed from the SD memory card.
[SAVE AS] operation allows to save with arbitrarily file name of up to eight characters (with file extension .cdl) to a SD memory card. It cannot be saved if there is a file with a same name.
The CDL parameter can also be set from [MENU].
It is also saved in the setup file.
All the parameters are recorded as a file together with the video on the P2 card or the SD memory card when the CDL function is enabled.
The recorded file name will be the same name as the video clip.
The file extension is .cdl.
CDL can be changed even during recording when [Grading SEL] is set to [External App]. The setting value for the video in the last frame of the .cdl file is reflected to that file to be recorded.