[AUDIO SETTINGS]

Sets the audio recording function.

Item

Description of settings

[AUDIO RECORD]

Sets if the recording and output of the audio of the camera is to be performed or not.

[ON], [OFF]

  • Factory setting: [ON]

[AUDIO INPUT]

[INPUT 3 LINE/MIC SEL]

Sets the audio input signal from the device connected to the <INPUT 3> terminal.

[LINE]: Sets this when an audio device is connected to the line input.

[MIC]: Sets this when connected to an external microphone.

  • Factory setting: [LINE]

[INPUT 4 LINE/MIC SEL]

Sets the audio input signal from the device connected to the <INPUT 4> terminal.

[LINE]: Sets this when an audio device is connected to the line input.

[MIC]: Sets this when connected to an external microphone.

  • Factory setting: [LINE]

[INPUT 1/2 MIC POWER]

Switches the enable/disable of the phantom power supply of the external microphone connected to the <INPUT 1/2> terminal.

[ON], [OFF]

  • Factory setting: [OFF]

[INPUT 1/2 MIC LEVEL]

Sets the level of the external microphone connected to the <INPUT 1/2> terminal.

[−40dB]/[−50dB]/[−60dB]

  • Factory setting: [−40dB]

[INPUT3 MIC POWER]

Switches the enable/disable of the phantom power supply of the external microphone connected to the <INPUT 3> terminal.

[ON], [OFF]

  • Factory setting: [OFF]

[INPUT4 MIC POWER]

Switches the enable/disable of the phantom power supply of the external microphone connected to the <INPUT 4> terminal.

[ON], [OFF]

  • Factory setting: [OFF]

[INPUT3 MIC LEVEL]

Sets the level of the external microphone connected to the <INPUT 3> terminal.

[−40dB]/[−50dB]/[−60dB]

  • Factory setting: [−60dB]

[INPUT4 MIC LEVEL]

Sets the level of the external microphone connected to the <INPUT 4> terminal.

[−40dB]/[−50dB]/[−60dB]

  • Factory setting: [−60dB]

[INPUT3/4 LINE LEVEL]

Sets the line input level of the device connected to <INPUT 3> terminal and <INPUT 4> terminal.

[4dB]/[0dB]/[−3dB]

  • Factory setting: [4dB]

[CH1 IN SEL]

Sets the input signal to be recorded to audio channel 1.

[INPUT1]/[INPUT3]

  • Factory setting: [INPUT3]

[CH2 IN SEL]

Sets the input signal to be recorded to audio channel 2.

[INPUT2]/[INPUT4]

  • Factory setting: [INPUT4]

[CH3 IN SEL]

Sets the input signal to be recorded to audio channel 3.

[INPUT1]/[INPUT3]

  • Factory setting: [INPUT3]

[CH4 IN SEL]

Sets the input signal to be recorded to audio channel 4.

[INPUT2]/[INPUT4]

  • Factory setting: [INPUT4]

[CH1 MIC LOWCUT]

Enables/disables the lowcut filter for audio channel 1.

[ON], [OFF]

  • Factory setting: [OFF]

[CH2 MIC LOWCUT]

Enables/disables the lowcut filter for audio channel 2.

[ON], [OFF]

  • Factory setting: [OFF]

[CH3 MIC LOWCUT]

Enables/disables the lowcut filter for audio channel 3.

[ON], [OFF]

  • Factory setting: [OFF]

[CH4 MIC LOWCUT]

Enables/disables the lowcut filter for audio channel 4.

[ON], [OFF]

  • Factory setting: [OFF]

[TEST TONE]

Sets if the test signal (tone signal with specification level 1 kHz) is output or not when the video is switched to color bar.

The standard level varies depending on the setting of [HEADROOM].

[ON], [OFF]

  • Factory setting: [ON]

[AUDIO LEVEL]

[CH1 LEVEL]

Sets if the recording level adjustment method for audio channel 1 is to be automatic or manual.

[AUTO]: Adjust automatically.

[MANUAL]: Enables manual adjustment.

  • Factory setting: [AUTO]

[CH2 LEVEL]

Sets if the recording level adjustment method for audio channel 2 is to be automatic or manual.

[AUTO]: Adjust automatically.

[MANUAL]: Enables manual adjustment.

  • Factory setting: [AUTO]

[CH3 LEVEL]

Sets if the recording level adjustment method for audio channel 3 is to be automatic or manual.

[AUTO]: Adjust automatically.

[MANUAL]: Enables manual adjustment.

  • Factory setting: [AUTO]

[CH4 LEVEL]

Sets if the recording level adjustment method for audio channel 4 is to be automatic or manual.

[AUTO]: Adjust automatically.

[MANUAL]: Enables manual adjustment.

  • Factory setting: [AUTO]

[CH1 VOL]

Adjusts with this item when the recording level adjustment method for audio channel 1 is [MANUAL].

[0] - [100]

  • Factory setting: [70]

[CH2 VOL]

Adjusts with this item when the recording level adjustment method for audio channel 2 is [MANUAL].

[0] - [100]

  • Factory setting: [70]

[CH3 VOL]

Adjusts with this item when the recording level adjustment method for audio channel 3 is [MANUAL].

[0] - [100]

  • Factory setting: [70]

[CH4 VOL]

Adjusts with this item when the recording level adjustment method for audio channel 4 is [MANUAL].

[0] - [100]

  • Factory setting: [70]

[CH1 LIMITER]

Switches enable/disable of the audio channel 1 limiter when the audio recording level adjustment method for audio channel 1 is [MANUAL].

[ON], [OFF]

  • Factory setting: [OFF]

[CH2 LIMITER]

Switches enable/disable of the audio channel 2 limiter when the audio recording level adjustment method for audio channel 2 is [MANUAL].

[ON], [OFF]

  • Factory setting: [OFF]

[CH3 LIMITER]

Switches enable/disable of the audio channel 3 limiter when the audio recording level adjustment method for audio channel 3 is [MANUAL].

[ON], [OFF]

  • Factory setting: [OFF]

[CH4 LIMITER]

Switches enable/disable of the audio channel 4 limiter when the audio recording level adjustment method for audio channel 4 is [MANUAL].

[ON], [OFF]

  • Factory setting: [OFF]

[HEADROOM]

Sets the headroom (standard level).

[18dB], [20dB]

  • Factory setting: [20dB]

[AUDIO OUTPUT]

[MONITOR CH]

Sets the audio channel to be output from the <PHONES> terminal.

The display channel of the audio level meter and the channel for the audio volume are also switched in conjunction.

This will be the operation target channel for the direct volume control.

[CH1/2]: Outputs audio channel 1/2.

[CH3/4]: Outputs audio channel 3/4.

  • Factory setting: [CH1/2]

[MONITOR SEL]

Sets the audio format (mono, stereo, mix) to be output from the <PHONES> terminal.

When [MONITOR CH] is set to [CH1/2]:

[MONO CH1], [MONO CH2], [STEREO CH1/2], [MIX CH1/2]

When [MONITOR CH] is set to [CH3/4]:

[MONO CH3], [MONO CH4], [STEREO CH3/4], [MIX CH3/4]

  • Factory setting: [STEREO CH1/2]

[MONITOR DELAY]

Sets whether to delay the audio from the <PHONES> terminal to match the monitor output.

[ON], [OFF]

  • Factory setting: [OFF]

[MONITOR VOL]

Adjusts the level of audio to be output from the <PHONES> terminal.

[0] - [100]

  • Factory setting: [70]

[ALARM]

Sets the volume of the warning sound to be output from the <PHONES> terminal.

[LOUD], [MEDIUM], [SMALL], [OFF]

  • Factory setting: [MEDIUM]