Using audio devices

body_connect_audio_device
  1. <INPUT 3> terminal

  2. <INPUT 4> terminal

Connect the audio device and the <INPUT 3> terminal or the <INPUT 4> terminal with the XLR cable.

In accordance with the channel with the XLR cable connected, select [INPUT3] and [INPUT4] in the audio input on the control panel.

Select [LINE] in [MENU] → [AUDIO SETTINGS] → [AUDIO INPUT] → [INPUT 3 LINE/MIC SEL] and [INPUT 4 LINE/MIC SEL].

Setting the control panel

osd_select_audioinput_device

Press the <HOME> button to display the HOME screen.

From [SYSTEM] → [AUDIO], select [AUDIO IN].

Select [INPUT3] in [CH1 IN], and [INPUT4] in [CH2 IN].

To record the stereo microphone audio input of the <INPUT 3>/<INPUT 4> terminal to audio channels 3/4, switch to [CH3/4] in [MONITOR SEL], and then select [INPUT3] in [CH3 IN], and [INPUT4] in [CH4 IN].