- Top
- Other Useful Functions
- Assigning functions to the USER buttons
- Selectable functions
Selectable functions
Item | Description |
---|---|
[INHIBIT] |
Disables assignment of functions. |
[SIX USER BUTTONS] |
Sets against the <USER 1> to <USER 3> buttons, when the control panel operation button is used as the USER button. |
[AWB] |
Assigns the automatic white balance function. |
[Y GET] |
Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the center. |
[EXPAND1] |
Assigns the enlargement function 1. |
[EXPAND2] |
Assigns the enlargement function 2. |
[OPEN IRIS F.A.] |
Assigns the open iris focus assist function. |
[IN COLOR F.A.] |
Assigns the focus in color function. |
[SQ. F.A.] |
Assigns the focus square function. |
[MONO F.A.] |
Assigns the monochrome display function. |
[WFM] |
Enables/disables the viewfinder wave form display. |
[BARS] |
Assigns the color bars display function. |
[ONE PUSH A. IRIS] |
Executes the one-push auto iris. |
[FALSE COLOR] |
Enables/disables the false color mode. |
[ZEBRA] |
Superimposes the zebra signal to the output from the <VF SDI> terminal. |
[VF SDI COLOR] |
Switches output images from the <VF SDI> terminal. |
[SDI OUT 1 COLOR] |
Switches the output image from the <SDI OUT 1> terminal. |
[SDI OUT 2 COLOR] |
Switches the output image from the <SDI OUT 2> terminal. |
[VF SDI CLEAN] |
Sets so only video is output from the <VF SDI> terminal. |
[VF SDI MARKER] |
Sets so video and marker signal are output from the <VF SDI> terminal. |
[VF SDI DESQUEEZE] |
Switches ON/OFF of the de-squeeze function against the output from the <VF SDI> terminal. |
[VF SDI IMAGE INVERT] |
Switches ON/OFF of the invert display function against the output from the <VF SDI> terminal. |
[SMOOTH MODE] |
Assigns the smooth mode function. |
[TEXT MEMO] |
Assigns the text memo function. |
[SHOT MARK] |
Assigns the shot mark function. |
[REC SW] |
Assigns the function of the <REC> button. |
[AUDIO MON VOL] |
Calls the screen to adjust the audio monitor output to the control panel. |
[AUDIO IN VOL] |
Calls the screen to adjust the audio input to the control panel. |
[AUDIO MONITOR CH] |
Switches the audio channel to output to the <PHONES> terminal. Switches the setting of [MENU] → [AUDIO SETTINGS] → [AUDIO OUTPUT] → [MONITOR CH]. |
[DIRECT VOL CTRL] |
Calls the function to adjust the audio input with the <IRIS/SEL> dial button or the <IRIS> dial on the grip module. The channel set with [MENU] → [AUDIO SETTINGS] → [AUDIO OUTPUT] → [MONITOR CH] will be adjusted. |
[VFR SW] |
Enables/disables the variable frame rate function. |
[CHECK LAST CLIP START] |
Plays back the first 5 seconds of the newest clip of the clips recorded after the power was turned on. Enabled only in the HOME screen or the VIEW screen. |
[CHECK LAST CLIP END] |
Plays back the last 5 seconds of the newest clip of the clips recorded after the power was turned on. Enabled only in the HOME screen or the VIEW screen. |
[RETURN] |
The return video signal input to the <GENLOCK IN> terminal can be confirmed in the viewfinder screen, output video from the <VF SDI> terminal, or the VIEW screen while the button assigned with the function is pressed.
|