Warning and status display section

body_parts_warning

  1. <DISPLAY SELECT> button

    Switches the display of the LCD monitor. Press the <DISPLAY SELECT> button to switch between the image or thumbnail display and the status display.

  2. <BACKLIGHT> button

    Controls the brightness of the LCD monitor.

    Every press of the button adjusts the brightness.

  3. <WARNING> lamp (Warnings description list)

    Starts flashing or is illuminated if something unusual occurs in the memory.

  4. <USB> lamp

    Lights when the camera is in the USB mode.

  5. Back tally switch

    Controls the action of the back and rear tally lamps.

    <ON>

    Enables the back and rear tally lamps.

    <OFF>

    Disables the back and rear tally lamps.

  6. Back tally lamp

    When the back tally switch is set to <ON>, the lamp acts in the same way as the front tally lamp at the viewfinder.

  7. Rear tally lamp

    When the back tally switch is set to <ON>, the lamp acts in the same way as the back tally lamp.