Pre-recording

This function enables recording of video and audio from a fixed amount of time before recording is actually started.

co_other_pre_rec

Check the settings of each item in the main menu → [SYSTEM] → [SYSTEM MODE].

For details on system modes in which the pre-recording function can be used, refer to the table in “System modes and recording functions”.

For details on menu operations, refer to “Setting menu basic operations”.

Set [ON] in the main menu → [REC/PB] → [REC FUNCTION] → [PRE REC], and set pre-recording by [PRE REC TIME].

  • The range that can be set for pre-recording time differs depending on the settings of the system mode (main menu → [SYSTEM] → [SYSTEM MODE] → [LINE&FREQ] and [REC FORMAT]).

    • When [LINE&FREQ] and [REC FORMAT] are set to [AVC-I100] in 1080P mode: 0 - 3 seconds

    • When [REC FORMAT] is set to [DVCPRO] or [DV]: 0 - 15 seconds

    • When other than above is set: 0 - 8 seconds

  • [P-REC] is displayed at the top of the status display. (Information display such as interval recording/pre-recording)

Press the <REC> button.