List of recording settings and recording functions

The recording modes of the camera act as follows depending on the setting of [REC SIGNAL] in the main menu → [SYSTEM] → [SYSTEM MODE] and the setting of [RECORDING] in [REC/PB] → [REC FUNCTION]. Even in “Available” cases, recording functions are restricted in some system modes. For details, refer to the table in “System modes and recording functions”.

Setting

Recording setting (setting menu)

Recording/operation enabled/disabled

Operation mode

[REC SIGNAL]

[REC FUNCTION]

Pre-recording

One-clip recording

Simultaneous recording

Interval recording

[CAM]

[INTERVAL]

Not available

Not available

Not available

One-shot recording

[CAM]

[ONE SHOT]

Not available

Not available

Not available

Loop recording

[CAM]

[LOOP]

Not available

Not available

Not available

Standard recording

[CAM]

[NORMAL]

Available

Available

Available

SDI input recording

[SDI]

Disabled

Not available

Not available

Available

Setting

Recording setting (setting menu)

Recording/operation enabled/disabled

Operation mode

[REC SIGNAL]

[REC FUNCTION]

Dual codec recording

Text memo

Shot mark

Interval recording

[CAM]

[INTERVAL]

Not available

Not available

Not available

One-shot recording

[CAM]

[ONE SHOT]

Not available

Not available

Not available

Loop recording

[CAM]

[LOOP]

Not available

Not available

Not available

Standard recording

[CAM]

[NORMAL]

Available

Available

Available

SDI input recording

[SDI]

Disabled

Available*

Available

Available

It is not available when [LINE&FREQ] is [480-59.94i] or [576-50i].