One-shot recording

Check the settings of each item in the main menu → [SYSTEM] → [SYSTEM MODE].

For details on system modes in which the one-shot recording function can be used, refer to the table in “System modes and recording functions”.

For details on menu operations, refer to “Setting menu basic operations”.

Set [ONE SHOT] in the main menu → [REC/PB] → [REC FUNCTION] → [RECORDING].

Set the following related items in the main menu → [REC/PB] → [REC FUNCTION].

• [HOLD]: Holds the [REC FUNCTION] setting after the power is turned off

• [REC TIME]: Duration of each recording

• [START DELAY]: Delay time from the time when the <REC> button is pressed until the time the first recording starts

Press the <REC> button.

• Recording takes place for the time set in step 3, and then pauses.

• To stop recording, press the <STOP> button.

• When [OFF] is set in the main menu → [REC/PB] → [REC FUNCTION] → [HOLD], turning off the camera clears the one-shot recording settings.

• To clear the settings, set [NORMAL] in the main menu → [REC/PB] → [REC FUNCTION] → [RECORDING].

• The following are displayed on the top right in the status display and the right side in the viewfinder or LCD monitor.

  • During recording: [i-REC] lights

  • During pause: [i-REC] flashes

  • During stop: [i] flashes