Zebra patterns display

The camera can display two types of zebra patterns.

When the <ZEBRA> switch of the viewfinder is set to <ON>, the zebra pattern currently set in the menu is displayed on the viewfinder screen.

Zebra patterns can also be displayed in the video of the monitor output terminal (<SDI OUT2>, <VIDEO OUT>, <HDMI OUT>) according to settings.

The level for displaying zebra patterns can be set in the main menu → [VF] → [VF DISPLAY].

Item

Description of settings

[ZEBRA1 DETECT]

Sets the level of zebra pattern 1 tilting to the right.

[0%]…[109%]

  • Factory setting: [70%]

[ZEBRA2 DETECT]

Sets the level of zebra pattern 2 tilting to the left.

[0%]…[109%]

  • Factory setting: [85%]

[ZEBRA2]

Selects the type of [ZEBRA2].

[ON], [SPOT], [OFF]

  • Factory setting: [SPOT]

[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.

co_other_zebra

To display the zebra pattern in the video of the monitor output terminal (<SDI OUT2>, <VIDEO OUT>, <HDMI OUT>), set in the main menu → [I/F SETUP] → [OUTPUT SEL] → [MONITOR OUT ZEBRA].