Shot mark recording function

Shot mark is the mark added to the thumbnail of each clip to distinguish that clip from others.

Only clips with shot marks attached can be displayed or played back.

Adding shot marks

Make sure that [SHOT MARK] is set in the main menu → [CAMERA] → [USER SW] → [SHOT MARK (U3)].

  • If it is set, the shot mark function is assigned to the <SHOT MARKER> button.

  • The shot mark function can be assigned to the <RET> button. To assign the function to the <RET> button, set [SHOT MARK] in the main menu → [CAMERA] → [SW MODE] → [RET SW].

During recording or a pause after recording, press the button to which the shot mark is assigned.

  • [MARK ON] is displayed, and the shot mark is added to the most recently recorded clip.

  • Another press of the button displays [MARK OFF] and the shot mark disappears.