How to use user data

The content of setting data can be written to and read written data from user area on the camera’s internal memory.

Use of this data allows you to quickly reproduce optimum setup states.

Writing setting data to user area

Select [SAVE USER DATA] in the main menu → [FILE] → [INITIALIZE], and press the jog dial button (or <SET> button).

The confirmation screen is displayed.

Select [YES], and press the jog dial button (or <SET> button).

When the completion message is displayed, press the jog dial button (or <SET> button).

Reading written user data

Select [LOAD USER DATA] in the main menu → [FILE], and press the jog dial button (or <SET> button).

The confirmation screen is displayed.

If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete.

Select [YES], and press the jog dial button (or <SET> button).

Reading out of the file begins.