Recording to the SD memory card

Insert the SD memory card into the camera.

Select the main menu → [FILE] → [SD CARD PROPERTY] (or the main menu → [CLIP] → [PROPERTY] → [SD CARD]).

• The format status is displayed in [SD STANDARD].

  If [NOT SUPPORTED] is displayed, format the card with the camera.

• In the [PROXY REM] item, check the remaining recording time of the proxy data.

  The remaining SD memory card capacity displayed ([PROXY REM]) indicates the remaining proxy recording, but it may differ from the actual available space. If short recordings are repeated, the available recording time may decrease significantly compared to the available space. When the remaining capacity exceeds 999 min, [999min] is displayed.

  If the proxy is not recorded to the SD memory card, the remaining time is not displayed.

• In the [NUMBER OF CLIPS] item, check the number of clips recorded in the SD memory card.

  If the number of clips is 1000 or more, no additional proxy data can be recorded to the SD memory card even if there is available capacity.

• Shot marks and text memos cannot be added to the clips in the SD memory card,

• Deleting the clips recorded on the P2 card on the thumbnail screen does not delete the proxy data recorded on the SD memory card.

Insert the SD memory card into the camera.

Select [YES] in the main menu → [FILE] → [FORMAT SD CARD].

This completes formatting the SD memory card.