Selecting video output

The video output method can be selected.

Video output, etc. can be selected by the setting of [OUTPUT SEL] in the main menu → [I/F SETUP] and the setting of [DOWNCON SETTING] → [DOWNCON MODE].

Menu item

Description of settings

[SDI2/HDMI OUT]

Selects the system mode signal method or down converter output for output from the <SDI OUT2> and <HDMI OUT> terminals.

[1080P SDI2/HDMI OUT]

Selects whether to convert output signals from the monitor output terminals (<SDI OUT2>, <HDMI OUT>) to 1080i at 1080P.

[3G-SDI OUT]

Selects the 3G-HD SDI signal type output from the <SDI OUT1> and <SDI OUT2> terminals from [LEVEL-A] or [LEVEL-B] at 1080P.

[DOWNCON MODE]

Selects the screen type for down-conversion output (composite and SD SDI output) at 1080P, 1080i, or 720P.

Selecting video output from each terminal

[LINE&FREQ]

Monitor output setting

Video output

[SDI2/HDMI OUT]

[1080P SDI2/HDMI OUT]

<SDI OUT1> terminal

<SDI OUT2> terminal

<HDMI OUT> terminal

<VIDEO OUT> terminal

[1080-59.94P]

[SYSTEM MODE]

[1080P]

1080/59.94P*

1080/59.94P*

1080/59.94P

480/59.94i

[1080i]

1080/59.94i

1080/59.94i

[DOWNCON]

Disabled

480/59.94i

480/59.94P

[1080-50P]

[SYSTEM MODE]

[1080P]

1080/50P*

1080/50P*

1080/50P

576/50i

[1080i]

1080/50i

1080/50i

[DOWNCON]

Disabled

576/50i

576/50P

[1080-59.94i]

[SYSTEM MODE]

—

1080/59.94i

1080/59.94i

1080/59.94i

480/59.94i

[DOWNCON]

480/59.94i

480/59.94P

[1080-50i]

[SYSTEM MODE]

—

1080/50i

1080/50i

1080/50i

576/50i

[DOWNCON]

576/50i

576/50P

[1080-23.98PsF]

[SYSTEM MODE]

[1080P]

1080/23.98PsF*

1080/59.94P*

1080/59.94P

480/59.94i

[1080i]

1080/59.94i

1080/59.94i

[DOWNCON]

Disabled

480/59.94i

480/59.94i

[720-59.94P]

[SYSTEM MODE]

—

720/59.94P

720/59.94P

720/59.94P

480/59.94i

[DOWNCON]

480/59.94i

480/59.94i

[720-50P]

[SYSTEM MODE]

—

720/50P

720/50P

720/50P

576/50i

[DOWNCON]

576/50i

576/50P

[480-59.94i]

—

—

480/59.94i

480/59.94i

480/59.94P

480/59.94i

[576-50i]

—

—

576/50i

576/50i

576/50P

576/50i

Output type can be selected from [LEVEL-A] or [LEVEL-B] in the main menu → [I/F SETUP] → [OUTPUT SEL] → [3G-SDI OUT]. This item is set to [LEVEL-B] in the factory setting.