Playing back clips

Press the <THUMBNAIL> button.

The thumbnail screen appears on the viewfinder screen.

Use the cursor buttons to move the cursor over the clip to be played back.

Press the <PLAY/PAUSE> button.

Playback starts from the beginning of the clip indicated by the cursor.
After playback of the clip indicated by the cursor ends, the clips will be played back in the order displayed on the thumbnail screen. The screen returns to the thumbnail screen when playback of the last clip ends.
By changing the thumbnail display settings, you can set it to play clips on a specified slot or clips with an inserted text memo only.
To change the playback order of the clips, select the clips in the order to be played back. Select [SELECTED CLIPS] in the main menu → [CLIP] → [REPOSITION] to display the clips in the selected order.
During playback of clips, press the </REW> button to start 4x speed reverse playback, and the <FF/> button to start 4x speed fast playback. Press the <PLAY/PAUSE> button to return to normal playback.
During playback of clips, press the <PLAY/PAUSE> button to pause the playback.
During a pause, press the </REW> button to pause the playback at the beginning of the clip. Press the </REW> button again to pause the playback at the beginning of the previous clip.
During a pause, press the <FF/> button to pause the playback at the beginning of the next clip.
Pressing the <STOP> button during clip playback stops the playback and returns the display to the thumbnail screen.

NOTE

When playing clips, it is not necessary to select the clips (blue frames around the thumbnails).
Clips with clip numbers displayed in red cannot be played back. These are the clips in different video formats (such as 1080i, 480i).
When playback is stopped, the cursor moves to the position of the clip that was being played back, regardless of where the playback started.
Press the <PLAY/PAUSE> button again to start playback from the beginning of the clip under the cursor. To continue to play back from where previously stopped, select [RESUME] in the main menu → [CLIP] → [THUMBNAIL SETUP] → [PB POSITION].
Playing different compressed recording formats may cause audio and video distortions in between clips.
Continuously playing clips of the same format but of different audio bit rates mutes the audio in between clips.
You can play back clips from the text memo position by switching the thumbnail screen to the text memo display. (Playing back from the text memo position)
When playing back clips from a thumbnail, you can set the playback start position in the main menu → [CLIP] → [THUMBNAIL SETUP] → [PB POSITION].