- Top
- Shooting
- Setting the time data
- Recording and output of time codes and user bits
Recording and output of time codes and user bits
Recording and output of time codes
[REC FORMAT] indicates only frame rate. For example, [AVC-I100/60i] is 60i, and [AVC-G50/30PN] is 30P.
System setting state | Recording TC | Output TC | ||
|---|---|---|---|---|
[REC FORMAT] | LTC | VITC | TC OUT | LTC, VITC of HD SDI |
60P 60i |
Recording run/free run*1 [DF]/[NDF] 30 frames |
Same value as LTC (No recording in [DV] mode) |
LTC is output. |
LTC is output. (No recording in [480i] mode) |
30P |
Recording run/free run*1*2 [DF]/[NDF] 30 frames |
Same value as LTC |
LTC is output. |
LTC is output. |
24P |
Recording run/free run*3 [NDF] fixed 24 frames |
Same value as LTC |
LTC is converted to 30 frames and output. |
LTC is output. |
50P 50i |
Recording run/free run*1 25 frames |
Same value as LTC (No recording in [DV] mode) |
LTC is output. |
LTC is output. (No recording in [576i] mode) |
25P |
Recording run/free run*1*2 25 frames |
Same value as LTC |
LTC is output. |
LTC is output. |
24P (when [LINE&FREQ] is [1080-23.98PsF]) |
Recording run/free run*4 [NDF] fixed 24 frames |
Same value as LTC |
LTC is output as 24 frames as is. |
LTC is output. |
For free run, the time code is slaved to the input TC of the <TC IN> terminal.
Cannot make a slave during recording in native recording mode.
In free run, the time code is converted to 24 frames and slaved when the input TC of the <TC IN> terminal is 30 frame non-drop frame. However, the time code cannot be slaved during recording.
In free run, the time code is slaved when the input TC of the <TC IN> terminal is a non-drop frame. However, the time code cannot be slaved during recording.
Recording and output of user bits
[REC FORMAT] indicates only frame rate. For example, [AVC-I100/60i] is 60i, and [AVC-G50/30PN] is 30P.
System setting state | Recording UB | Output UB | |||
|---|---|---|---|---|---|
[REC FORMAT] | LTC UB | VITC UB | <TC OUT> terminal UB | LTC UB for HD SDI | VITC UB for HD SDI |
60P 60i 50P 50i |
Following [UBG MODE]* |
Following [VITC UBG MODE] (However, frame information is fixed at [720P]*) |
LTC UB is output. |
LTC UB is output. (No recording in [480i] and [576i]) |
VITC UB is output. (No recording in [480i] and [576i]) |
30P 24P 25P |
Following [UBG MODE].* |
Frame information is fixed. |
LTC UB is output. |
LTC UB is output. |
VITC UB is output. |
With [EXT], UB of the <TC IN> terminal is slaved.