P2 card, battery charge level, audio level display

window_parts_battery

  1. Recording media display

    Displays the recording media.

    [P2]

    P2 memory card

    [mP2]

    microP2 memory card

  2. Media remaining space indicator

    Indicates the remaining free space in the P2 card for each slot using a 7-segment display and remaining time.

    The P2 card remaining time indicated by a single segment is set in three or five minutes in the main menu → [I/F SETUP] → [BATTERY/P2CARD] → [CARD REMAIN/Seg]. Segments go out one segment at a time at each preset time.

  3. Battery charge level/power supply voltage display

    The remaining battery charge is displayed by 7 segments and the value of the power supply voltage is displayed. When a battery with a digital indication (% indication) is used, all seven segments up to the [F] position light if the battery charge level is 70% or higher.

    When the battery charge level falls below 70%, the segments go out one by one for each 10% drop. When set [100%] in the main menu → [I/F SETUP] → [BATTERY/P2CARD] → [BATT REMAIN FULL], seven segments can be set to light at 100%.

  4. Audio channel level meter

    When the audio channel selector switch is set to <CH1/2>, audio channel display numbers 1 and 2 are displayed, and the audio level of CH1 and CH2 is displayed. When <CH3/4> is set, audio channel display numbers 3 and 4 are displayed, and the audio level of CH3 and CH4 is displayed.