Inserting a P2 card

When using the camera for the first time, be sure to set the time data beforehand. (Setting the date/time of the internal clock)

Select and use either of the P2 or microP2 memory card slot on the camera.

co_body_insert_P2card

Set the <POWER> switch to < j > (ON).

Set which of P2 or microP2 memory cards to use.

Select [REC MEDIA] in the main menu → [REC/PB] → [REC/PB SETUP].

When using P2 memory cards, select [P2], and when using microP2 memory cards, select [microP2].

Open the slot cover. (Fig. 1)

Insert a card into the card slot. (Fig. 2)

  • P2 memory cards

    • Insert the card until the eject button pops out.

    • Insert the card with the logo facing up.

    • Press the eject button that pops up to the right.

  • microP2 memory cards

    • Insert with the label side facing up.

    • Card in microP2 memory card slot 3 can be inserted or removed by sliding the small window on the slot cover.

  • After a card is inserted, the P2 card access LED for the appropriate slot indicates the status of the P2 card. (Fig. 3) (P2 card access LEDs and status of P2 cards)

Close the slot cover.