Shooting and recording switch settings

After turning on the power and inserting the P2 card, set the switches as follows before starting operations.

body_switch_settings

  1. <USER MAIN> button

    Set to the card slot for recording target.

  2. <GAIN> switch

    Normally, set this to <L> (0 dB). If it is too dark, set the gain to an appropriate value.

  3. <OUTPUT>/<AUTO KNEE> switch

    Set this switch to <CAM>/<ON>.

  4. <TCG> switch

    Set this switch to <F-RUN> or <R-RUN>.

  5. <AUDIO SELECT CH1/3>, <AUDIO SELECT CH2/4> switches

    Set these switches to <AUTO>.