[MAINTENANCE]

These are items for performing maintenance inspection of the camera.

These menu items cannot be set when the thumbnail screen is displayed.

[SYSTEM CHECK]

Item

Description of settings

[COLOR CHECK]

Displays the RGB level near screen center in the viewfinder, and displays whether all systems (from the optical to digital) are transmitting normally.

[LENS ADJ.]

Item

Description of settings

[F2.8 ADJ.]

Sets the iris to F2.8 only when set to [ON]. (Adjusts so that it becomes F2.8 at the lens)

[ON], [OFF]

  • Factory setting: [OFF]

[F16 ADJ.]

Sets the iris to F16 only when set to [ON]. (Adjusts so that it becomes F16 at the lens)

[ON], [OFF]

  • Factory setting: [OFF]

[BLACK SHADING]

Item

Description of settings

[CORRECT]

Enables/disables digital black shading correction.

[ON], [OFF]

  • Factory setting: [ON]

[DETECTION(DIG)]

Executes digital black shading correction.

[WHITE SHADING]

Item

Description of settings

[CORRECT]

Enables/disables white shading correction.

[ON], [OFF]

  • Factory setting: [ON]

[R H SAW]

White shading correction is performed manually.

Adjusts sawtooth waveforms and parabolic wave forms of RGB channels in the horizontal and vertical directions.

[−255]…[255]

  • Factory setting: [0]

[R H PARA]

[R V SAW]

[R V PARA]

[G H SAW]

[G H PARA]

[G V SAW]

[G V PARA]

[B H SAW]

[B H PARA]

[B V SAW]

[B V PARA]

[LENS FILE ADJ.]

Item

Description of settings

[LENS FILE ADJ. MODE]

Selects the mode to perform lens adjustment.

[ON]: The Rch and Bch gain adjusted in the main menu → [PAINT] → [RB GAIN CONTROL], and the Rch, Gch, and Bch flare levels adjusted in [RGB BLACK CONTROL] are disabled.

[OFF]: The Rch and Bch gain adjusted in the main menu → [PAINT] → [RB GAIN CONTROL], and the Rch, Gch, and Bch flare levels adjusted in [RGB BLACK CONTROL] are enabled.

  • Factory setting: [OFF]

[LENS R GAIN OFFSET]

Corrects the Rch sensitivity of the lens to use.

[−200]…[200]

  • Factory setting: [0]

[LENS B GAIN OFFSET]

Corrects the Bch sensitivity of the lens to use.

[−200]…[200]

  • Factory setting: [0]

[LENS R FLARE]

Adjusts the Rch flare level.

[0]…[100]

[LENS G FLARE]

Adjusts the Gch flare level.

[0]…[100]

[LENS B FLARE]

Adjusts the Bch flare level.

[0]…[100]

[CAC ADJ.]

Item

Description of settings

[CAC CONTROL]

Turns chromatic aberration correction (CAC) [ON]/[OFF].

[ON]: Compensates for chromatic aberration.

[OFF]: Does not compensate for chromatic aberration.

  • Factory setting: [ON]

[LIST/DELETE]

Views the list of CAC FILE stored in the camera internal memory and deletes files of the numbers selected from the list of CAC FILE.

[No1]…[No32]

  • Factory setting: [No1]