Mode check display

The camera settings and status can be displayed on the viewfinder screen.

Pushing the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch on the camera towards the <MCK/MCL> side switches the six screens.

[STATUS] screen display → [!LED] screen display → [FUNCTION] screen display → [AUDIO] screen display → [CAC] screen display → [USER SW STATUS] screen display → no display

Each screen is displayed for approximately five seconds. Pushing the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch towards the <MCK/MCL> side while the screen is displayed moves the display to the next screen. [ON]/[OFF] of each screen display can be selected in the main menu → [VF] → [MODE CHECK IND]. For details on [STATUS] screen displays, refer to “Checking and displaying shooting status”.

[!LED] screen

Displays items that are causes of [!LED] lighting.

  • [!] is attached to items currently selected at [!LED].

  • imageicon_exclamation is attached to items currently targeted for [!LED] lighting.

[GAIN(0dB)]

Displays the gain status.

[DS.GAIN]

Displays the digital super gain value.

[SHUTTER]

Displays the shutter status.

[WHITE PRE.]

Displays the white balance status.

[EXTENDER]

Displays the extender status by [EX]/[OFF].

[B.GAMMA]

Displays the black gamma status by [ON]/[OFF].

[MATRIX]

Displays the [MATRIX] status by [A]/[B]/[OFF].

[COLOR COR.]

Displays the [COLOR CORRECTION] status by [ON]/[OFF].

[FILTER]

Displays the filter status.

[ATW]

Displays the status of automatic tracking white balance.

[FUNCTION] screen

Displays the video output status and information of the recording media.

[SDI OUT1]

—

Displays the status of the signal output from the <SDI OUT1> terminal.

[OUTPUT]

Displays the status of [MEM]/[CAM] or [OFF] set by [SDI OUT1] and [SDI OUT1 MODE] in the main menu → [I/F SETUP] → [OUTPUT SEL].

[TYPE]

Displays the format of the signal output from the <SDI OUT1> terminal by [HD-SDI]/[SD-SDI].

[CHAR]

Displays the superimposition status of characters selected in the main menu → [I/F SETUP] → [OUTPUT SEL] → [SDI OUT1 CHAR] by [ON]/[OFF].

[SDI OUT2]

—

Displays the status of the signal output from the <SDI OUT2> terminal.

[OUTPUT]

Displays the status of [MEM]/[CAM] or [OFF] set by [SDI OUT2] and [MONITOR OUT MODE] in the main menu → [I/F SETUP] → [OUTPUT SEL].

[SELECT]

Displays the signal format set by [SDI2/HDMI OUT] and [1080P SDI2/HDMI OUT] in the main menu → [I/F SETUP] → [OUTPUT SEL] by [SYSTEM]/[DOWNCON]/[1080i].

[CHAR]

Displays the position of the <MON OUT CHARACTER> switch by [ON]/[OFF].

[P2CARD STATUS]

—

Displays the status of the P2 card inserted in the card slot, remaining capacity and total used capacity.

The statuses of cards to be displayed are as follows:

[ACTIVE]/[ACCESSING]/[INFO READING]/[FULL]/[PROTECTED]/[NOT SUPPORTED]/[FORMAT ERROR]/[AUTH NG]/[REC IMPOSSIBLE]/[NO CARD]

For details, refer to “P2 card access LEDs and status of P2 cards”.

[TOTAL P2/mP2]

Displays the remaining capacity/total capacity totaled for slots 1/2 (or slots 3/4) and the recording medium ([P2] or [mP2]).

[SLOT1] or [SLOT3]

Displays the status of the P2 card in slot 1 (or slot 3) and remaining capacity/total capacity.

[SLOT2] or [SLOT4]

Displays the status of the P2 card in slot 2 (or slot 4) and remaining capacity/total capacity.

[PROXY]

[MEDIA]

Displays the media selection status for proxy recording.

[P2]/[P2&SD]/[OFF]

[MODE]

Displays the setting status for proxy recording mode.

[STD 2CH MP4]/[SHQ 2CH MOV]/[HQ 4CH MOV]/[HQ 2CH MOV]/[LOW 2CH MOV]/[AVC-G6 2CH]

[SUPER]

Displays the superimposed setting status of the time code.

[UPPER]/[LOWER]/[OFF]

[PROXY ERROR]

Displays the operation error on the proxy module.

[NETWORK]

[NETWORK]

Displays the network to be used and its status.

[AUDIO] screen

Displays audio settings and the selection status of each recording channel.

[SAMPLE RES]

—

Displays the number of audio recording bits.

[MIC POWER (MENU)]

—

Displays the menu setting status of power supply to the microphone.

[FRONT]

Displays the power supply status to the front microphone currently set in the main menu → [I/F SETUP] → [MIC/AUDIO] → [FRONT MIC POWER] by [ON]/[OFF].

[REAR]

Displays whether to set supply of power to the microphone on the <AUDIO IN> terminal at the rear in the main menu → [I/F SETUP] → [MIC/AUDIO] → [REAR MIC POWER].

  • [OFF]: Power is not supplied to the microphone.

  • [ON]: Power is supplied to the microphone when the <LINE>/<MIC> selector switch is set to <MIC> and the microphone input power selector switch is set to <+48V>.

[VR SELECT]

—

Displays which of [CH1/2] and [CH3/4] the audio level adjustment dial is to be set as enabled to in the main menu → [I/F SETUP] → [MIC/AUDIO] → [VR SELECT].

[LEVEL]

[CH1/2/3/4]

Displays the recording level adjustment method currently selected on each channel.

  • [VR]: Displayed when manual adjustment using the adjustment dial is set.

  • [MENU]: Displayed when manual adjustment using [LVL CONTROL CH3(CH1)]/[LVL CONTROL CH4(CH2)] is set in the main menu → [I/F SETUP] → [MIC/AUDIO].

  • [AUTO]: Displayed when automatic adjustment is set.

[F.VR]

[CH1/2/3/4]

Displays by [ON]/[OFF] whether the <F.AUDIO LEVEL> dial is enabled on the channel to which [VR] (manual adjustment by adjustment dial) is displayed in [LEVEL].

[A.IN]

[CH1/2/3/4]

Displays the input status of each channel by [FRONT] (front)/[REAR] (rear)/[W.L.] (wireless).

[METER]

[CH1/2/3/4]

Displays the recording level of each channel.

[CAC INFO] screen

Displays the operation status or information of CAC.

[CAC CONT]

Displays the operation status of CAC.

  • [ON]: [ON] is set to in the main menu → [MAINTENANCE] → [CAC ADJ.] → [CAC CONTROL], and CAC is active.

  • [STOP]: [ON] is set to in the main menu → [MAINTENANCE] → [CAC ADJ.] → [CAC CONTROL], however, CAC operation stops under certain data or lens conditions.

  • [OFF]: [OFF] is set to in the main menu → [MAINTENANCE] → [CAC ADJ.] → [CAC CONTROL], and CAC is not active.

[CAC MODE]

Displays the operation mode of CAC.

  • [AUTO]: The CAC file is automatically selected.

[CONNECT LENS TYPE]

Displays the lens ID of the currently connected digital lens.

[SELECT FILE TITLE]

Displays the title and the file version of the CAC file currently used in the operation. The CAC file can be set in the main menu → [MAINTENANCE] → [CAC ADJ.].

[CAC WARNING]

Displays a warning when operation of CAC has stopped.

  • [CAC LENS DATA INVALID]: This is displayed, for example, when the response data from the lens is not supported.

  • [LENS INIT. NOT COMPLETED]: This is displayed, for example, when initialization of the lens cannot complete.

[USER SW] screen

Displays the assignment status of each <USER> button. For details, refer to “Assigning functions to <USER> buttons”.

[USER SW]

[USER MAIN (UM)]

Displays the assignment to the <USER MAIN> button.

[USER1 (U1)]

Displays the assignment to the <USER1> button.

[USER2 (U2)]

Displays the assignment to the <USER2> button.

[SHOT MARK (U3)]

Displays the assignment to the <SHOT MARK> button.

[TEXT MEMO (U4)]

Displays the assignment to the <TEXT MEMO> button.

[USER5 (U5)]

Displays the assignment to the <USER5> button.

[OTHER ASSIGN]

[RET SW]

Displays the assignment to the <RET> button on the lens.

[GAIN L]

Displays the gain value assigned to <L> of the <GAIN> switch.

[GAIN M]

Displays the gain value assigned to <M> of the <GAIN> switch.

[GAIN H]

Displays the gain value assigned to <H> of the <GAIN> switch.

[S.GAIN]

Enumerates and displays the gain value assigned as super gain.

[DS.GAIN]

Enumerates and displays the gain value assigned as digital super gain.