Viewfinder screen display for shutter
For details, refer to “Viewfinder status display”.
- Top
- Shooting
- Setting the electronic shutter
- Setting the shutter mode and speed
Setting the shutter mode and speed
Switch the <SHUTTER> switch to set the shutter speed in the shutter mode.
The shutter speed in the synchro scan mode can be easily change by the <SYNCHRO SCAN> adjustment button on the side.
The shutter speed selection range can be restricted or use of the synchro scan mode can be selected beforehand in the main menu → [CAMERA] → [SHUTTER SPEED] and [SHUTTER SELECT].
Once selected, the shutter speed is saved even after the camera is turned off.
Press the <SHUTTER> switch positioned at <OFF> towards <ON>.
Press the <SHUTTER> switch from <ON> towards <SEL>, and repeat this operation until the desired mode or speed is displayed on the viewfinder screen.
If all modes and speeds are available, the display changes in the following order.
