- Top
- Shooting
- Handling setting data
- How to restore menu setting status to factory setting values
How to restore menu setting status to factory setting values
The menu setting status on the camera can be returned to factory setting status.
Select [LOAD FACTORY DATA] in the main menu → [FILE] → [INITIALIZE], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete.
Select [YES], and press the jog dial button (or <SET> button).
Reading out of data for the factory setting begins.