- Top
- Network Connection
- Preparing for connection
- For wireless module other than AJ-WM30/AJ-WM50
For wireless module other than AJ-WM30/AJ-WM50
Connect the wireless module other than AJ-WM30/AJ-WM50 (optional) to the camera.
Turn off the power of the camera before connecting or disconnecting the wireless module.
Open the cover. (Fig. 1)
Attach the USB 2.0 extension cable to the <USB2.0> terminal (sub-host). (Fig. 2)
Rotate the part at the bottom of the cover in the direction of the arrow (Fig. 3) and close the cover so that the USB 2.0 extension cable goes through the gap. (Fig. 4)
Connect the wireless module. (Fig. 5)