For shooting

White/black balance adjustment to completion of recording

For shooting, use the following steps.

body_rec_adjustment

  1. <CC FILTER>/<ND FILTER> dial

  2. <REC> button

  3. <SHUTTER> switch

  4. <AUTO W/B BAL> switch

  5. <WHITE BAL> switch

Select the <CC FILTER>/<ND FILTER> dial setting according to the light conditions.

For details on setting example of the <CC FILTER>/<ND FILTER> dial, refer to “Shooting and recording/playback functions section”.

Operate the <WHITE BAL> switch.

Press the <AUTO W/B BAL> switch towards the <AWB> side to adjust the white balance. (Adjusting the white balance)

Press the <AUTO W/B BAL> switch towards the <ABB> side to adjust the black balance. (Adjusting the black balance)

Press the <AUTO W/B BAL> switch towards the <AWB> side to adjust the white balance.

Point the camera at your subject and adjust the focus and zoom.

When using the electronic shutter, set the shutter speed and shutter mode. (Setting the electronic shutter)

Press the <REC> button to start recording.

The [REC] lamp in the viewfinder is illuminated during recording.

To stop recording, press the <REC> button again.

The [REC] lamp in the viewfinder goes out.