Linking to external devices

USB device mode

Data (files) for performing nonlinear editing on a computer are transferred.

co_body_externaldevices_usb2

P2 memory cards and microP2 memory cards are optionally available. They are not supplied with the camera.

The USB 2.0 cable is not supplied with the camera. Prepare a commercial USB 2.0 cable (double-shielded for noise suppression).

USB host mode (<USB3.0 HOST> terminal connection)

The camera directly controls the hard disk drive to transfer data.

co_body_externaldevices_usb3

A USB 3.0 cable is not supplied with this product. Use a commercially sold USB 3.0 cable (with double shielding for noise reduction).

Connecting to the remote operation panel (AK-HRP200G)

You can remote control some functions by connecting the remote operation panel AK-HRP200G (optional) using a LAN cable.

co_body_externaldevices_HRP200G

Connecting to monitor

A monitor can be connected to output images.

co_body_externaldevices_monitor

Cables are optionally available. They are not supplied with the camera.

Use an HDMI cable (optional) with double shielding. For the HDMI cable, using Panasonic HDMI cable is recommended.

For the BNC cable (optional) connected to the <SDI OUT> terminal, prepare a double-shielded cable equivalent to 5C-FB.