- Top
- Shooting
- Multi formats
- Selecting recording signals
Selecting recording signals
This camera can record HD (1080P, 1080i, 720P) signals in a combined format of AVC-Intra, AVC-LongG, and DVCPRO HD codecs, and can record SD (480i/576i) signals in a combined format of DVCPRO50, DVCPRO, and DV codecs.
Recording and shooting signals can be selected in the main menu → [SYSTEM MODE].
Setting | Description of settings | |
---|---|---|
[SYSTEM MODE] | [LINE&FREQ] | Select the signal format from 1080P/1080i/720P/480i/576i. If this setting has been changed, select [YES] on a confirmation message and restart the camera. |
[REC FORMAT] | Select the codec of AVC-Intra, AVC-LongG, and DVCPRO HD in the HD mode, and select the codec of DVCPRO50, DVCPRO, and DV in the SD mode. | |
[AUDIO SMPL RES] | Select the number of audio bits ([24BIT] or [16BIT]) when [REC FORMAT] is [AVC-I100] or [AVC-I50]. At [REC FORMAT] other than these, recording is performed at the number of audio bits fixed to 24 bits or 16 bits. For details, refer to “System modes and recording functions”. | |
[ASPECT CONV] | In the SD mode, select the video aspect ratio for recording and output. |