Charging the battery

The battery is not charged at the time of purchase. Fully charge the battery in the battery charger before using the battery.

It is recommended that you have one extra battery.


Place the battery horizontally along the imageicon_battery_charger_set mark in the battery charger and slide it in. (Fig. 1)

Press it in firmly.

Connect an AC cable. (Fig. 2)

Connect in the order shown in the figure.

  • <POWER> lamp

    • Once the AC cable is connected, the lamp will light up.

  • <CHARGE> lamp

    • Lit: Charging.

    • Not lit: Charging is complete.

    • Flashing: Reinsert the battery.

Slide the battery out to remove it. (Fig. 3)