Interval recording

The camera will record one frame at each set time interval.

co_other_interval_rec

Set all items in the main menu → [SYSTEM MODE].

Set [INTERVAL] in the main menu → [RECORDING SETUP] → [RECORDING].

Set the time in the main menu → [RECORDING SETUP] → [RECORDING SETTING] → [INTERVAL TIME].

Press the REC button.

  • The camera will repeat the operation of one frame recording at each set time interval.

  • To stop recording, press the <(> button.

  • To clear settings, set [NORMAL] in the main menu → [RECORDING SETUP] → [RECORDING].

  • When [OFF] is set in the main menu → [RECORDING SETUP] → [RECORDING SETTING] → [RECORDING HOLD], interval recording settings are cleared by turning off the camera.

  • [I-REC] is displayed while recording, and [I-] is displayed while paused. However, if the setting in step 3 is less than two seconds, [I-REC] flashes according to the set interval time.

  • When recording is stopped, [I-] flashes.