How to use user data

The content of setting data can be written to and read written data from user area on the internal memory of the camera.

Use of this data allows you to quickly reproduce optimum setup states.

Writing setting data to user area

Select [SAVE] in the main menu → [OTHER FUNCTIONS] → [USER FILE] and press the control stick (or <SEL/PUSH SET> dial button).

The confirmation screen is displayed.

Select [YES] and press the control stick (or <SEL/PUSH SET> dial button).

When the completion message is displayed, press the control stick (or the <SEL/PUSH SET> dial button).

Loading written user data

Select [LOAD] in the main menu → [OTHER FUNCTIONS] → [USER FILE] and press the control stick (or <SEL/PUSH SET> dial button).

The confirmation screen is displayed.

If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete.

Select [YES] and press the control stick (or <SEL/PUSH SET> dial button).

Loading of the file begins.