[DISPLAY SETUP]

Configure the settings regarding the details to be displayed on the viewfinder or LCD monitor.

These menu items cannot be set when the thumbnail screen is displayed.

Item

Description of settings

[MENU DISPLAY]

Selects the LCD monitor or the view finder as the location where the menu is displayed.

[LCD&EVF]: Displays the menu both on the LCD monitor and the viewfinder.

[LCD]: Displays the menu only on the LCD monitor.

  • Factory setting: [LCD&EVF]

[ZEBRA1 DETECT]

Sets the extraction level of zebra pattern 1.

[0%]…[109%]

  • Factory setting: [70%]

[ZEBRA2 DETECT]

Sets the extraction level of zebra pattern 2.

[0%]…[109%]

  • Factory setting: [85%]

[ZEBRA2]

Sets on/off of zebra pattern 2 and selects the type.

[ON], [SPOT], [OFF]

  • Factory setting: [SPOT]

[CENTER MARK]

Controls the center mark.

[1]: + (large)

[2]: Open center (large)

[3]: + (small)

[4]: Open center (small)

[OFF]: Does not display.

  • Factory setting: [1]

[SAFETY MARK]

Selects the type of frame for the safety zone marker.

[1]: Box

[2]: Corners

[OFF]: Does not display.

  • Factory setting: [2]

[SAFETY AREA]

Sets the size of the safety zone marker.

The constant ratio of length to width can be set in 1% increments.

[80%]…[100%]

  • Factory setting: [90%]

[FRAME MARK]

Enables/disables frame marker.

[ON], [OFF]

  • Factory setting: [OFF]

[FRAME SIG]

Sets frame marker aspect ratio.

[4:3], [13:9], [14:9], [1.85:1], [2.35:1]

  • Factory setting: [4:3]

[FRAME LVL]

Sets the level of the outside of the frame marker.

[0]…[15]

  • Factory setting: [15]

[LEVEL GAUGE]

Enables/disables level gauge.

[ON], [OFF]

  • Factory setting: [OFF]

[FOCUS BAR]

Displays/hides the focus bar indicating the degree of focus.

[ON], [OFF]

  • Factory setting: [OFF]

[ZOOM/FOCUS]

Selects the unit of zoom and focus values.

[NUMBER]: Displays position values of zoom and focus from [0] to [99].

[mm/feet]: Zoom is displayed in units of millimeters, and focus in units of feet.

[mm/m]: Zoom is displayed in units of millimeters, and focus in units of meters.

[OFF]: Neither zoom nor focus is displayed.

  • Factory setting: [NUMBER]

[LEVEL METER]

Displays/hides audio level meter.

[ON], [OFF]

  • Factory setting: [ON]

[DATE/TIME]

Sets date and time display.

[TIME]: Displays the hour, minute, and second.

[DATE]: Displays the year, month, and date.

[TIME&DATE]: Displays the hour, minute, and second, as well as year, month, and date.

[OFF]: Does not display.

  • Factory setting: [OFF]

[REC COUNTER]

Sets operation of the counter for recording.

[TOTAL]: Performs continuous counting until it is reset using the <RESET> button.

[CLIP]: Clears the counter value at the start of recording and counts the time for each recording.

  • Factory setting: [TOTAL]

[P2CARD REMAIN]

Turns display of the remaining recording capacity for the P2 card [ON]/[OFF].

[ON], [OFF]

  • Factory setting: [ON]

[BATTERY]

Turns the battery charge level indicator [ON]/[OFF].

[ON], [OFF]

  • Factory setting: [ON]

[REC DURING UPLOAD]

Selects [ON]/[OFF] of the rec during upload display status.

[ON], [OFF]

  • Factory setting: [ON]

[STREAMING]

Selects [ON]/[OFF] indicating the distribution status of the streaming video.

[ON], [OFF]

  • Factory setting: [ON]

[OTHER DISPLAY]

Sets display details of other information.

[PARTIAL]: Displays information partly.

[ALL]: Displays all information.

[USER]: Displays the information set in [DISPLAY SETTING].

  • Factory setting: [PARTIAL]

[DISPLAY SETTING]

[IRIS]

Displays/hides F value and auto iris control status.

[ON], [OFF]

  • Factory setting: [ON]

[GAIN]

Displays/hides gain value.

[ON], [OFF]

  • Factory setting: [ON]

[SHUTTER]

Displays/hides shutter speed.

[ON], [OFF]

  • Factory setting: [ON]

[WHITE BALANCE]

Displays/hides the <WHITE BAL> switch position.

[ON], [OFF]

  • Factory setting: [ON]

[ND]

Displays/hides the set value of ND filter.

[ON], [OFF]

  • Factory setting: [ON]

[Y GET]

Displays/hides brightness of Y GET.

[ON], [OFF]

  • Factory setting: [ON]

[D.ZOOM]

Displays/hides digital zoom display.

[ON], [OFF]

  • Factory setting: [ON]

[SCENE FILE]

Displays/hides scene file name.

[ON], [OFF]

  • Factory setting: [ON]

[DRS]

Toggles whether to display when the dynamic range stretcher function is activated.

[ON], [OFF]

  • Factory setting: [ON]

[FBC]

Toggles whether to display when the flash band compensation function is activated.

[ON], [OFF]

  • Factory setting: [ON]

[AREA]

Toggles whether to display when the area mode function is activated.

[ON], [OFF]

  • Factory setting: [ON]

[OIS]

Displays/hides image stabilizer display.

[ON], [OFF]

  • Factory setting: [ON]

[FULL AUTO]

Displays/hides the display when the <AUTO/MANUAL> switch is at <AUTO>.

[ON], [OFF]

  • Factory setting: [ON]

[SHOOTING MODE]

Displays/hides high-sensitivity mode.

[ON], [OFF]

  • Factory setting: [ON]

[PB MODE]

Displays/hides the operation status of playback.

[ON], [OFF]

  • Factory setting: [ON]

[SYSTEM MODE]

Displays/hides system mode.

[ON], [OFF]

  • Factory setting: [OFF]

[REC FORMAT]

Displays/hides recording format display.

[ON], [OFF]

  • Factory setting: [ON]

[FRAME RATE]

Displays/hides frame rate.

[ON], [OFF]

  • Factory setting: [ON]

[ASPECT]

Displays/hides letterbox recording display.

[ON], [OFF]

  • Factory setting: [ON]

[REC MEDIA]

Displays/hides recording media.

[ON], [OFF]

  • Factory setting: [ON]

[ONE CLIP REC]

Displays/hides the status of one-clip recording mode.

[ON], [OFF]

  • Factory setting: [ON]

[REC MODE]

Displays/hides simultaneous recording mode display.

[ON], [OFF]

  • Factory setting: [ON]

[PROXY]

Displays/hides proxy information.

[ON], [OFF]

  • Factory setting: [ON]

[GPS]

Displays/hides GPS signal reception status.

[ON], [OFF]

  • Factory setting: [ON]

[EVF DETAIL]

Adjusts the contour of the video in the viewfinder or LCD monitor to make it easier to focus.

[ON], [OFF]

  • Factory setting: [ON]

If the function is assigned to the USER button, [ON]/[OFF] can be switched using the USER button.

[EVF PEAK LEVEL]

Adjusts the peaking level of the viewfinder and LCD monitor.

[−7]…[7]

  • Factory setting: [0]

[EVF PEAK FREQ]

Adjusts the peaking frequency of the viewfinder and LCD monitor.

[HIGH], [LOW]

  • Factory setting: [LOW]

[EVF SETTING]

[EVF BRIGHTNESS]

Adjusts the brightness of the viewfinder.

[−15]…[15]

  • Factory setting: [0]

[EVF CONTRAST]

Adjusts the contrast of the viewfinder.

[−30]…[30]

  • Factory setting: [0]

[EVF COLOR LEVEL]

Adjusts the color level of the viewfinder.

[−15]…[15]

  • Factory setting: [0]

[EVF COLOR]

Selects whether to display video in the viewfinder in color or in black and white.

[ON]: Displays in color.

[OFF]: Displays in black and white.

  • Factory setting: [ON]

[EYE SENSOR]

Selects sensitivity of eye sensor.

[HIGH], [LOW]

  • Factory setting: [HIGH]

[LCD SETTING]

[LCD BRIGHTNESS]

Adjusts the brightness of the LCD monitor.

[−15]…[15]

  • Factory setting: [0]

[LCD CONTRAST]

Adjusts the contrast of the LCD monitor.

[−30]…[30]

  • Factory setting: [0]

[LCD COLOR LEVEL]

Adjusts the color level of the LCD monitor.

[−15]…[15]

  • Factory setting: [0]

[LCD BACKLIGHT]

Adjusts the brightness of the LCD monitor backlight.

[1]…[−3]

[1]: Brightens more than normal.

[−3]: Becomes the darkest.

  • Factory setting: [0]

[SELF SHOOT]

Sets the display of the LCD monitor when mirror shooting is performed.

[NORMAL]: Does not invert the left and right sides.

[MIRROR]: Inverts the left and right sides.

  • Factory setting: [MIRROR]