Selecting video output from each terminal
“—” indicates an item that cannot be selected.
Setting | Video output | |||
---|---|---|---|---|
[LINE&FREQ] | [SDI&HDMI SELECT] | <SDI OUT> terminal | <HDMI OUT> terminal | <GENLOCK IN/VIDEO OUT> terminal |
[1080-59.94P] | [SYSTEM MODE] | 1080/59.94P*1 | 1080/59.94P | 480/59.94i |
[1080i] | 1080/59.94i | 1080/59.94i | 480/59.94i | |
[DOWNCON] | 480/59.94i | 480/59.94P | 480/59.94i | |
[1080-50P] | [SYSTEM MODE] | 1080/50P*2 | 1080/50P | 576/50i |
[1080i] | 1080/50i | 1080/50i | 576/50i | |
[DOWNCON] | 576/50i | 576/50P | 576/50i | |
[1080-59.94i] | [SYSTEM MODE] | 1080/59.94i | 1080/59.94i | 480/59.94i |
[DOWNCON] | 480/59.94i | 480/59.94P | 480/59.94i | |
[1080-50i] | [SYSTEM MODE] | 1080/50i | 1080/50i | 576/50i |
[DOWNCON] | 576/50i | 576/50P | 576/50i | |
[1080-23.98PsF] | [SYSTEM MODE] | 1080/23.98PsF*2 | — | 480/59.94i |
[DOWNCON] | 480/59.94i | — | 480/59.94i | |
[720-59.94P] | [SYSTEM MODE] | 720/59.94P | 720/59.94P | 480/59.94i |
[DOWNCON] | 480/59.94i | 480/59.94P | 480/59.94i | |
[720-50P] | [SYSTEM MODE] | 720/50P | 720/50P | 576/50i |
[DOWNCON] | 576/50i | 576/50P | 576/50i | |
[480-59.94i] | — | 480/59.94i | 480/59.94P | 480/59.94i |
— | ||||
— | ||||
[576-50i] | — | 576/50i | 576/50P | 576/50i |
— | ||||
— |
Output type can be selected from [LEVEL-A] and [LEVEL-B] in the main menu → [OUTPUT SEL] → [3G-SDI OUT]. [LEVEL-B] is set in the factory settings.
When [LINE&FREQ] is set to [1080-23.98PsF] and [SDI&HDMI SELECT] is set to [SYSTEM MODE], video output from the <SDI OUT> terminal in thumbnail mode or playback mode (including recording check) becomes 1080/60P. In addition, it is not output from the <HDMI OUT> terminal. When the mode is changed between the camera mode and thumbnail mode (or playback mode), video signal output from the <SDI OUT> terminal and the <GENLOCK IN/VIDEO OUT> terminal may be disrupted, or video on the LCD monitor and viewfinder may be disrupted.