Zebra patterns display

The camera can display two types of zebra patterns.

Press the <ZEBRA> button displays the zebra pattern that is set in the menu.

Zebra patterns can also be displayed in the video from the <GENLOCK IN/VIDEO OUT> terminal according to the menu setting.

The level for zebra pattern display can be set in the main menu → [DISPLAY SETUP].

Item

Description of settings

[ZEBRA1 DETECT]

Sets the extraction level of zebra pattern 1.

[0%]…[109%]

  • Factory setting: [70%]

[ZEBRA2 DETECT]

Sets the extraction level of zebra pattern 2.

[0%]…[109%]

  • Factory setting: [85%]

[ZEBRA2]

Sets on/off of zebra pattern 2 and selects the type.

[ON], [SPOT], [OFF]

  • Factory setting: [SPOT]

[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.

co_other_zebra

To display the zebra patterns in the video of the monitor output terminal (<GENLOCK IN/VIDEO OUT>), set in the main menu → [OUTPUT SEL] → [VIDEO OUT ZEBRA].