[SYSTEM MODE]

Configure the settings regarding the recording format of video and audio.

Item

Description of settings

[LINE&FREQ]

Sets the signal format of the camera. If this setting has been changed, select [YES] on a confirmation message and restart the camera.

[1080-59.94P], [1080-50P], [1080-59.94i], [1080-50i], [1080-23.98PsF], [720-59.94P], [720-50P], [480-59.94i], [576-50i]

[REC FORMAT]

Selects the codec for recording and the mode for shooting and recording.

[AVC-I200/60P], [AVC-I200/60i], [AVC-I200/50P], [AVC-I200/50i], [AVC-I200/30PN], [AVC-I200/25PN], [AVC-I200/24PN], [AVC-I100/60P], [AVC-I100/60i], [AVC-I100/50P], [AVC-I100/50i], [AVC-I100/30PN], [AVC-I100/24PN], [AVC-I100/25PN], [AVC-I50/60P], [AVC-I50/60i], [AVC-I50/50P], [AVC-I50/50i], [AVC-G50/60P], [AVC-G50/60i], [AVC-G50/50P], [AVC-G50/50i], [AVC-G25/60P], [AVC-G25/60i], [AVC-G25/50P], [AVC-G25/50i], [AVC-G12/60P], [AVC-G12/60i], [AVC-G12/50P], [AVC-G12/50i], [DVCPRO HD/60P], [DVCPRO HD/60i], [DVCPRO HD/50P], [DVCPRO HD/50i], [DVCPRO50/60i], [DVCPRO50/50i], [DVCPRO/60i], [DVCPRO/50i], [DV/60i], [DV/50i]

[CAMERA MODE]

Sets the camera shooting mode for the 1080i SD mode.

[60i], [50i], [30P], [25P]

[AUDIO SMPL RES]

Selects the number of audio bits ([24BIT] or [16BIT]) when [REC FORMAT] is [AVC-I100] or [AVC-I50].

At [REC FORMAT] other than these, recording is performed at the number of audio bits fixed to 24 bits or 16 bits.

[16BIT], [24BIT]

[ASPECT CONV]

Selects the aspect ratio of the video to be recorded in 480i, 576i.

[SIDE CROP], [LETTER BOX], [SQUEEZE]

  • Factory setting: [SIDE CROP]

[SCAN REVERSE]

Enables/disables the scan reverse shooting function for vertical/horizontal inversion of images.

[ON], [OFF]

  • Factory setting: [OFF]

[SETUP]

Sets the setup level of 480i video signals.

[0%], [7.5%A]

[SHOOTING MODE]

Sets the shooting mode according to the shooting environment.

[NORMAL]: Selects the shooting mode for an environment at normal brightness.

[HIGH SENS.]: Selects high-sensitivity. (Appropriate when shooting in a dark environment.) The LCD monitor shows [H.SENS.].

  • Factory setting: [NORMAL]