Attaching the front microphone

Microphones such as a super-directional microphone AG-MC200G (optional) can be attached.

Screws for tapped hole protection are attached on the camera body. Remove those screws when you attach the microphone holder.

co_body_use_front_mic

Attach the microphone holder. (Fig. 1)

Attach the microphone and tighten the microphone holder clamping screw. (Fig. 2)

Connect the microphone connecting cable to the <AUDIO INPUT 1> terminal on the camera. (Fig. 3)

Secure the microphone connecting cable with the microphone cable clamp.

Set the <INPUT 1> switch to match the microphone to be connected.