[SW MODE]

Configure the settings of each mode when switched using each switch.

These menu items cannot be set when the thumbnail screen is displayed.

Item

Description of settings

[LOW GAIN]

Sets the gain value to be assigned to the <L> position of the <GAIN> switch. (Negative value of gain is only in [HIGH SENS.] mode.)

[−3dB]…[18dB]

  • Factory setting: [0dB]

[MID GAIN]

Sets the gain value to be assigned to the <M> position of the <GAIN> switch. (Negative value of gain is only in [HIGH SENS.] mode.)

[−3dB]…[18dB]

  • Factory setting: [6dB]

[HIGH GAIN]

Sets the gain value to be assigned to the <H> position of the <GAIN> switch. (Negative value of gain is only in [HIGH SENS.] mode.)

[−3dB]…[18dB]

  • Factory setting: [12dB]

[SUPER GAIN]

Sets the super gain to be assigned to the USER button.

[24dB], [30dB], [36dB]

[ALL]: Each time the USER button is pressed, the setting toggles [24dB] → [30dB] → [36dB] → (off) in order.

  • Factory setting: [36dB]

[OIS]

Enables/disables the image stabilizer function.

[ON]: Enables the image stabilizer function.

[OFF]: Disables the image stabilizer function.

  • Factory setting: [ON]

If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.

[ATW]

Assigns the auto tracking white balance function to the <WHITE BAL> switch.

[Ach], [Bch], [PRE], [OFF]

  • Factory setting: [OFF]

[ATW SPEED]

Sets the control speed of the auto tracking white balance function.

[FAST], [NORMAL], [SLOW]

  • Factory setting: [NORMAL]

[ATW TARGET R]

Finely adjusts the Rch output for convergence with auto tracking white balance operation.

[−10]…[10]

  • Factory setting: [0]

[ATW TARGET B]

Finely adjusts the Bch output for convergence with auto tracking white balance operation.

[−10]…[10]

  • Factory setting: [0]

[W.BAL PRESET]

Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.

[3200K], [5600K], [VAR]

  • Factory setting: [3200K]

[W.BAL VAR]

Sets the value of [VAR] in [W.BAL PRESET].

It can also be operated by the <SEL/PUSH SET> dial button.

Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.

[2000K]…[15000K]

  • Factory setting: [3200K]

[H.ZOOM SPEED]

Sets the zoom speed when the HANDLE ZOOM switch is <FIX>.

[1]…[99]

  • Factory setting: [50]

[PUSH AF MODE]

Assigns the operation mode when the <PUSH AUTO> button is pressed.

[TURBO]: Performs high-speed focusing automatically until the image is focused, once the button is pressed.

[NORMAL]: Performs automatic focusing while pressing the button.

  • Factory setting: [TURBO]

[MF ASSIST]

Sets whether to adjust the last focus automatically when in the manual focus mode.

[ON]: Adjusts the last focus automatically.

[OFF]: Does not adjust the focus automatically.

  • Factory setting: [OFF]

If the image is largely out of focus, the focus may not be adjusted properly.

Operations with a remote control connected to the <CAM REMOTE> terminal are not available.

[FOCUS ASSIST MODE]

Sets the operation mode of the focus assist function.

[EXPAND]: Expands the center part of the screen of the LCD monitor.

[IN RED]: Outlines the contour of the video in red.

  • Factory setting: [EXPAND]

If functions are assigned to the USER buttons, on and off of the function can be switched using the USER button operations.

[MACRO]

Enables/disables the focus macro function.

[ON]: Enables the focus macro function.

[OFF]: Disables the focus macro function.

  • Factory setting: [OFF]

If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.

[MACRO MODE]

Sets the operation mode when the focus macro function is enabled.

[WIDE]: Only the wide macro area is enabled.

[ALL]: Tele macro area and wide macro area are enabled.

  • Factory setting: [WIDE]

[A.IRIS SPEED]

Sets the control speed of the auto iris function.

[FAST], [NORMAL], [SLOW]

  • Factory setting: [NORMAL]

[A.IRIS WINDOW]

Selects the auto iris detection window.

[NORM1]: Window that is near screen center.

[NORM2]: Window that is near screen bottom.

[CENTER]: Window that is a spot in the screen center.

  • Factory setting: [NORM1]

[AREA MODE]

Assigns the function to be performed within the area selected using the control stick during shooting.

[INHIBIT]: Does not allocate a function.

[FOCUS]: Auto focus/focus bar function

[IRIS]: Auto iris function

[Y GET]: Brightness display function

[FOCUS/IRIS]: Activates [FOCUS] and [IRIS] simultaneously.

[FOCUS/Y GET]: Activates [FOCUS] and [Y GET] simultaneously.

  • Factory setting: [INHIBIT]

[WFM MODE]

Selects the type of waveform to be displayed on the LCD monitor when the <WFM> button is pressed.

[WAVE]: Displays as a waveform.

[VECTOR]: Displays as a vector.

[WAVE/VECTOR]: Each time the <WFM> button is pressed, the display changes in order from (no display) → [WAVE] (waveform) → [VECTOR] (vector) → (no display).

  • Factory setting: [WAVE]

[ZEBRA]

Displays/hides zebra patterns.

[ON]: Displays zebra patterns.

[OFF]: Does not display zebra patterns.

  • Factory setting: [OFF]

If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.

[ZEBRA MODE]

Selects whether to keep displaying zebra patterns.

[CONTINUE]: Keep the display of zebra patterns.

[MOMENT]: Displays zebra patterns for approximately five seconds.

  • Factory setting: [MOMENT]

[BARS TYPE]

Selects the color bar to use.

[SMPTE]: Uses the color bar in the SMPTE standard.

[FULL BARS]: Uses full color bars.

[SPLIT]: Uses SPLIT color bars for SNG (Satellite News Gathering).

[ARIB]: Uses ARIB standard color bars.

  • Factory setting: [SMPTE]

[FRONT REC]

Sets operation of the REC button on the front of the camera.

[INHIBIT]: Does not activate the operation.

[ACTIVE]: Activates the operation.

  • Factory setting: [ACTIVE]

[ZOOM/FOCUS]

Sets where to operate the zoom and focus in an IP remote connection.

[IP REMOTE]: Works only when operation is done from the remote connection destination.

[CAMERA]: Works only when operation is done from the camera.

  • Factory setting: [IP REMOTE]