Top
Connecting to External Devices
Connecting to the remote operation panel (AK-HRP200G)
Remote control unit connected to the camera

Remote control unit connected to the camera

When AK-HRP200G is connected to the camera, the AK-HRP200G button’s operations are as follows:

Skin tone detail button (<SKINDTL>)

Operation varies depending on the lighting status of the button.

When the button lights up, the operation follows the menu setting value of the camera (setting for skin tone detail).
When the button lights off, the skin tone detail function is set to [OFF], regardless of the menu setting value of the camera.

After restarting the camera, the menu setting value is reflected in AK-HRP200G.

However, this function does not operate when the camera and AK-HRP200G have a serial connection.

Knee OFF button (<KNEE OFF>)

Operation varies depending on the lighting status of the button.

When the button lights up, the knee function is set to [OFF], regardless of the menu setting value of the camera.
When the button lights off, the operation follows the menu setting value of the camera (setting for the knee function).

After restarting the camera, the menu setting value is reflected in AK-HRP200G.

Matrix button (<MATRIX>)

When the button lights up, the menu setting value of the camera is always applied (setting for matrix). The function cannot be turned [OFF] even if the button is pressed.

After restarting the camera, the menu setting value is reflected in AK-HRP200G.

Scene file selection buttons (<SCENE1> - <SCENE4>)

Not supported.

User file selection buttons (<USER1> - <USER3>)

You can select the camera’s scene file F1 to F3. F4 to F6 cannot be selected.

However, this function does not operate when the camera and AK-HRP200G have a serial connection.

R flare/pedestal volume (<FLARE/PED R>), B flare/pedestal volume (<FLARE/PED B>)

Flare adjustment is not supported. Works only with the pedestal.

Adjusted value display area (4 digits)

Display of CC filter, zoom, and focus values are not supported.

Character/menu button (<CHARA/MENU>)

The status and menu are displayed in the output image from the <SDI OUT>, <HDMI OUT>, and <GENLOCK IN/VIDEO OUT> terminals regardless of camera’s menu setting value.

Sense volume (<SENSE>)

Zoom/focus speed can be adjusted.

Turning it to the right accelerates the zoom/focus speed.
Turning it to the left decelerates the zoom/focus speed.

ND filter/CC filter display selection button <ND/CC>

Zoom mode and focus mode can be switched.
Press the display selection button, and select either zoom mode or focus mode.
- During zoom mode, the adjusted value display area (4 digits) shows [Zo].
- During focus mode, the adjusted value display area (4 digits) shows [Fo].
  While the selection is displayed, you can change the adjusted value using the data set button (up) <UP>/data set button (down) <DOWN>.
Auto focus and manual focus can be switched.
Press the display selection button, and select the adjusted value display area (4 digits) [AF.]. While the selection is displayed, select auto focus or manual focus by pressing the data set button (up) <UP> or data set button (down) <DOWN>.
- During manual focus, [AF.of] is displayed.
- During auto focus, [AF.on] is displayed.
During frame rate mode, the adjusted value display area (4 digits) shows [Frof], but it does not operate on the camera.

Data set button (up) <UP>

Zooms in during zoom mode.

You can adjust focus (on the back) during focus mode.

Data set button (down) <DOWN>

Zooms out during zoom mode.

You can adjust focus (on the front) during focus mode.

Selection dial <SELECT>

You can adjust focus during zoom mode. Turning the dial to the right focuses on the back. Turning the dial to the left focuses on the front.

You can adjust zoom during focus mode. Turning the dial to the right performs zoom in, and turning the dial to the left performs zoom out.

Top of the page

TOC Index

Overview
Description of Parts
Preparation
Shooting
Playback
- Basic procedures
  - Preparation
  - Playback
- Thumbnail operations
Menu Operations
Display
- Screen status display
Connecting to External Devices
Network Connection
Maintenance
Specification
- Specifications
  - Dimensions
  - Specifications
Appendix
- Download

Overview
Description of Parts
Preparation
Shooting
Playback
Menu Operations
Display
Connecting to External Devices
Network Connection
Maintenance
Specification
Appendix

ABC
AC adaptor
Attaching
Removal
Adjusting image quality
Area mode function
[AREA SELECT]
ATW
Audio input
[AUDIO SETUP]
Audio the recording level
[AUTO SW]
Auto tracking white balance
[AWB PRE CONTROL]
Background recording
Backlight compensation
Battery
Attaching
Charging
Removing
Black balance
Black control function
Brightness adjustment
Built-in battery
Built-in microphone
[CAM REMOTE ADJ.]
[CARD FUNCTIONS]
Center marker
Chroma setting function
Clip
Copying
Deleting
Metadata
Playback
Properties
Reconnecting
Restoring
[CLIP]
Clock
Color bars
Color correction function
Counter
CPS
DEF
Date and time
Deleting last clip function
Detail function
[DIAGNOSTIC]
Direct menu operation
[DISPLAY SETUP]
Dual codec recording
Dynamic range stretcher function(1)
Dynamic range stretcher function(2)
Electronic shutter
[ENG SECURITY]
Error code
Error message
Expanded display
Eye cup
Eye sensor
FBC
Flash band compensation
Focus assist
Focus bar display
Focus in red display
Formatting
P2 card
SD memory card(1)
SD memory card(2)
Storage device
Frame marker
Front microphone
FTP client function
GHI
Gain
Gamma function
Genlock
GPS
Grip strap
Headphones
High color function
Hot swap recording
Image size
Image stabilization function
Interval recording
Iris
JKL
Knee function
LCD monitor
Displaying screen
Status display
Lens cover
Lens hood
Level gauge function
Loop recording
Low angle shooting
MNO
Macro
[MAINTENANCE]
Manual focus
Matrix function
Menu
Main menu
[OPTION MENU]
Setting menu
[USER MENU]
Metadata
microP2 memory card
Inserting
Removing
Write protect
Microphone
Mirror shooting
Mode check
Monitor
ND filter
Network
Settings
Wired LAN
Wireless LAN(1)
Wireless LAN(2)
[NETWORK SETUP]
One-clip recording
One-shot recording
[OTHER FUNCTIONS]
[OUTPUT SEL]
PQRS
P2 card
Formatting
Recording time
Status
Status display
Write back
P2 memory card
Inserting
Removing
Write protect
Pre-recording
Properties
Proxy recording
RB gain control function
Rec during upload function
Recording check function
Recording format
Recording functions
[RECORDING SETUP]
Remote control(1)
Remote control(2)
Safety zone marker
Scan reverse shooting
Scene file data
[SCENE FILE]
SD memory card
Formatting(1)
Formatting(2)
Handling
Inserting
Operation
Removing
Status display
Setting [USER MENU]
Setting data
Setting menu
Basic operations
Initializing(1)
Initializing(2)
Shooting
Shot mark(1)
Shot mark(2)
Shot mark recording
Shoulder strap
Shutter mode
Shutter speed
Simultaneous recording
Skin tone function
Specifications
Storage device
Exporting
Formatting
Importing
Information display
Streaming function
Super gain
[SW MODE]
[SYSTEM MODE]
TUV
Tally lamp
Text memo
Text memo recording
Thumbnail
Changing
Selecting
Setting
Time code
Time data
Time stamp function
Time zone
Tripod
TV
USB
Device mode
Host mode
User bits
USER button
User data
[USER MENU SEL]
[USER SW]
Variable frame rate
Viewfinder
Displaying screen
Status display
WXYZ
Warning system
Waveform monitor function
White balance
White clip function
Zebra patterns
Zoom
Zoom ring

ABC
AC adaptor
Attaching
Removal
Adjusting image quality
Area mode function
[AREA SELECT]
ATW
Audio input
[AUDIO SETUP]
Audio the recording level
[AUTO SW]
Auto tracking white balance
[AWB PRE CONTROL]
Background recording
Backlight compensation
Battery
Attaching
Charging
Removing
Black balance
Black control function
Brightness adjustment
Built-in battery
Built-in microphone
[CAM REMOTE ADJ.]
[CARD FUNCTIONS]
Center marker
Chroma setting function
Clip
Copying
Deleting
Metadata
Playback
Properties
Reconnecting
Restoring
[CLIP]
Clock
Color bars
Color correction function
Counter
CPS
DEF
Date and time
Deleting last clip function
Detail function
[DIAGNOSTIC]
Direct menu operation
[DISPLAY SETUP]
Dual codec recording
Dynamic range stretcher function(1)
Dynamic range stretcher function(2)
Electronic shutter
[ENG SECURITY]
Error code
Error message
Expanded display
Eye cup
Eye sensor
FBC
Flash band compensation
Focus assist
Focus bar display
Focus in red display
Formatting
P2 card
SD memory card(1)
SD memory card(2)
Storage device
Frame marker
Front microphone
FTP client function
GHI
Gain
Gamma function
Genlock
GPS
Grip strap
Headphones
High color function
Hot swap recording
Image size
Image stabilization function
Interval recording
Iris
JKL
Knee function
LCD monitor
Displaying screen
Status display
Lens cover
Lens hood
Level gauge function
Loop recording
Low angle shooting
MNO
Macro
[MAINTENANCE]
Manual focus
Matrix function
Menu
Main menu
[OPTION MENU]
Setting menu
[USER MENU]
Metadata
microP2 memory card
Inserting
Removing
Write protect
Microphone
Mirror shooting
Mode check
Monitor
ND filter
Network
Settings
Wired LAN
Wireless LAN(1)
Wireless LAN(2)
[NETWORK SETUP]
One-clip recording
One-shot recording
[OTHER FUNCTIONS]
[OUTPUT SEL]
PQRS
P2 card
Formatting
Recording time
Status
Status display
Write back
P2 memory card
Inserting
Removing
Write protect
Pre-recording
Properties
Proxy recording
RB gain control function
Rec during upload function
Recording check function
Recording format
Recording functions
[RECORDING SETUP]
Remote control(1)
Remote control(2)
Safety zone marker
Scan reverse shooting
Scene file data
[SCENE FILE]
SD memory card
Formatting(1)
Formatting(2)
Handling
Inserting
Operation
Removing
Status display
Setting [USER MENU]
Setting data
Setting menu
Basic operations
Initializing(1)
Initializing(2)
Shooting
Shot mark(1)
Shot mark(2)
Shot mark recording
Shoulder strap
Shutter mode
Shutter speed
Simultaneous recording
Skin tone function
Specifications
Storage device
Exporting
Formatting
Importing
Information display
Streaming function
Super gain
[SW MODE]
[SYSTEM MODE]
TUV
Tally lamp
Text memo
Text memo recording
Thumbnail
Changing
Selecting
Setting
Time code
Time data
Time stamp function
Time zone
Tripod
TV
USB
Device mode
Host mode
User bits
USER button
User data
[USER MENU SEL]
[USER SW]
Variable frame rate
Viewfinder
Displaying screen
Status display
WXYZ
Warning system
Waveform monitor function
White balance
White clip function
Zebra patterns
Zoom
Zoom ring